Contact Us
Products	Product Literature Order Form Credit Application FAQ About Us Contact Us
Brands  Clack  Filmtec  GA Murdock  GE Osmonics  Hanna  HM Digital  Hydronamic  John Guest  KX  Leak controller  Likuan  Miscellaneous  Norgren  Omnipure  PA-E  Pentek  QMP  Relton  SeaTech  TST  Watts	Instruments: Leak Controllers Detects leaks and automatically turns off source water to prevent damage Leak Controller LCS Series Leak Detector Upon sensing moisture, the Leak Controller will engage the shut-off valve and sound an alarm. The water source is cut off, stopping the leak while the alarm continues to sound until the valve is manually reset. By preventing continuous water flow, mold and property damage are restricted and user liability is reduced. The Leak Controller is designed for simple installation and operation. 1/4" or 3/8" Mur-lokTM fittings for copper or plastic tubing NSF Approved Automatic ball valve shut-off with manual reset dial LeakLogic RISC based management State of the art microchip technology for sensitive controls, operation verification and long battery life Audible alarm Two screw mounting plate allows for quick and simple installation Powered by 4 "AA" batteries No external electrical connections required Low Battery Alarm Ultra-sensitive water detection sensors Connected to one controller, multiple sensors can be "daisy-chained" together for increased coverage and protection in multiple areas. Product Literature & Spec Sheets View Larger Image Item Number Description         LCS14 Leak Controller - 1/4" Mur-lok® - Includes one 4' sensor   LCS38 Leak Controller - 3/8" Mur-lok® - Includes one 4' sensor   LCC03 Leak Controller Sensor - 3' Cord   LCC08 Leak Controller Sensor - 8' Cord   LCC15 Leak Controller Sensor - 15' Cord   *This product does not guarantee the prevention of water damage. Many factors increase the probability of of preventing water damage, including: Constant leak controller testing, physical verification of all parts, correct placement of sensors Leak Controller AquaGate CX Upon sensing moisture, the Aquagate will shut off the water flow and sound an alarm. Designed for use with appliances, hot water heaters, water softeners, and commercial water systems. - 1" Full Port Ball Valve with Auto Shut-off - Programmable Service Reminder Indicator - Water Detection Sensitivity Down to 2 ppm TDS - System operating range: 40º F to 100º F - LeakLogic™ RISC Based Logic Control - 4 "AA" Alkaline Batteries with Low Battery Indication - 2 year limited warranty - Water operating range: 36º F to 180º F Product Literature & Spec Sheets View Larger Image Item Number Description         LCA15 Direct Connect Sensor - 15' Cord   LCAGCX 1" Brass Ball Valve
Contact Us | Press Center | Site Map | Homepage   2008 G.A. Murdock Inc. All rights reserved.      Copyright & Trademark    Privacy Statement

Translate with AltaVista Babelfish

Español  |  Français  |  Deutsch  |  More Languages »