|
|
 |
Presenting the Revolutionary
Merlin POU RO System
|
Merlin Reverse Osmosis System from
GE Infrastructure Water and Process Technologies |
- NO TANK!
Uses continuous-flow water production, so a storage tank is no longer required.
- LOW ENERGY
Operates on line pressure, eliminating the need for an electrical pump in most applications
- STEADY STREAM OF INCOME
Customer replacement components will be made available only through professional channels
- NEVER RUNS DRY
Continuous clean, clear permeate water flows at (1/2 gpm/1.89 lpm)
|
Features & Specifications
- Continuous flow - no storage tank necessary
- Uses line pressure only (>40 psi/2.76 bar)
- 1/2 gpm permeate rate (1.89 lpm) @50 psi + 50°F
- Requires no pump, no electricity
- WQA Gold Seal listed
- Tested & passed ANSI-NSF 58 standards
- Compact design - fits easily under sink
- Consistent TDS rejection and membrane efficiency
- High recovery system
- Multiple dispensing locations off one system.
Parts & Accessories
|
Product Literature
|
|
MerlinTM RO System
| Item Number | Prefilter | Postfilter | Included Accessories | | |
| 1255052 | Carbon | Carbon | Drain Kit & Air Gap Faucet | | |
| 1263870 | Carbon | Carbon | Drain Kit | | |
| 3002041* | Sediment | Carbon | Drain Kit & Air Gap Faucet | | |
| 3002044* | Sediment | Carbon | Drain Kit | | |
| 3002043* | Sediment | ASO Cartridge | | | |
| 3015179 | Carbon | Carbon | Non-Labeled | | |
| 3016432 | Carbon | | Non-Labeled | | |
|
|
Mur-lok® RO-Pal Feed Valves more information »
| Item Number | Tube ID | Tube OD | Side Outlet | | |
| A0630825 | 1/4" | 3/8" | 1/2" Mur-lok® | | |
| A0830825 | 3/8" | 1/2" | 1/2" Mur-lok® | | |
| A1030825 | 1/2" | 5/8" | 1/2" Mur-lok® | | |
| A1430825 | 3/4" | 7/8" | 1/2" Mur-lok® | | |
|
|
Optional Accessories
| Item Number | Description | | | | |
| 1268260 | Flush Kit | Reduces TDS creep by back flushing the Merlin's membrane. | | | |
| 1240632 | Booster Pump | Increase incoming line pressure up to 65 psi. | | | |
| GAM MTK110 | Pressure Gauge Kit | Shows actual feed water pressure while the Merlin is running. | | | |
| 1271001 | Wall-Mount Bracket | Mount the complete Merlin system on the wall. | | | |
| 1271009 | Level Control Manifold | For use with atmospheric storage tanks, complete with inlet, outlet, injection option, solenoid, float and terminal for power. | | | |
| 1254894 | Chrome Air-Gap Faucet | High-flow chrome faucet with air-gap | | | |
| 1269967 | Faucet Air-Gap Replacement | Air-gap attachment for high-flow faucet. | | | |
| 1244617 | Complete Manifold Assembly | | | | |
| 1239705 | Replacement Sump | | | | |
| 1240326 | Replacement Sump O-ring | | | | |
|
 |
Replacement Cartridges
| Item Number | Description | | | | |
| 1266690 | Sediment Pre-filter | | | | |
| 1237460 | Carbon Pre-filter | | | | |
| 1244746 | Carbon Post-filter | | | | |
| 1269491 | ASO Cartridge | | | | |
| 1238342 | Membrane | | | | |
|
Call for Pricing 800-568-7565
Frequently Asked Questions
Does the unit come with a faucet?
Yes, it comes with a specially designed Air Gap faucet to accept the high flow rates through the Air Gap. It looks like a standard Chrome Touch-Flo faucet with a higher base.
What filters & membranes are used?
The unit uses 1 carbon block and 2 TFC membranes. These are custom sized and only available through Authorized Merlin Distributors.
What will the pressure of my product water be?
The product water will be approximately 15 psi less than the incoming water supply.
How much total water will the Merlin consume compared to a typical RO system with a storage tank?
The Merlin RO System is designed to operate at 33% efficiency. This means that for every 2 gallons of product water used, a total of 6 gallons will be needed. A standard RO system with a storage tank runs at about 5% efficiency. This means that for every 2 gallons of product water used, a total of 13-25 gallons will be needed *.
Can the Merlin RO System run continously?
The Merlin was designed to provide 0.5 gpm continous flow of product water over the course of a 24 hour period or longer. If more than 10 gallons of product water will be used on a daily basis, you must add additional Sediment Filtration/Chlorine Removal capacity.
What filters & membranes are used?
The unit utilizes 1 - 5 Micron Sediment Carbon Block Pre-filter, 2 - TFC High Production Membranes, and 1 - Granular Activated Carbon Post Filter. These are non-standard sized and only available through Authorized Merlin Distributors.
|
The Merlin Reverse Osmosis System is a product of the GE Infrastructure Water and Process Technologies division
|
