Faucets: Standard Non-Air Gap

FAQ

Faucets: Flip-handle long-reach style non-air gap faucets
Flip-handle lead-free drinking water faucets with a long-reach style spout.

7/16" UNS compression thread. 3" stud length. Includes 1/4" Brass Compression Nut.

NSF/ANSI Standard Certified Component
Requires mounting hole size between 7/16" and 1.25"

7/16" UNS compression thread. 2.5" stud length. Includes 1/4" Brass Compression Nut.

Item Number	Color
QMP102	Chrome
QMP102WP	Chrome - White Handle and Tip
QMP102D	Chrome - Dual Flow Faucet
QMP102C/AB	Antique Brass
QMP102C/AL	Almond
QMP102C/BC	Brushed Chrome
QMP102C/BIS	Biscuit
QMP102C/BL	Black
QMP102C/BF	Flat Black
QMP102C/BN	Brushed Nickel
QMP102C/BS	Brushed Stainless
QMP102C/ORB	Oil Rubbed Bronze
QMP102C/VB	Venetian Bronze
QMP102C/PB	Polished Brass
QMP102C/PEW	Pewter
QMP102C/PN	Polished Nickel
QMP102C/SN	Satin Nickel
QMP102W	White
QMP902/C/BS	Stainless Steel Faucet w/Brushed Finish - Dome Base

Faucets require mounting holse size of 7/16" - 1.5"

7/16" UNS compression thread. 3" stud length. Includes 1/4" Brass Compression Nut.

NSF/ANSI Standard Certified Component
Requires mounting hole size between 7/16" and 1.25"

7/16" UNS compression thread. 2.5" stud length. Includes 1/4" Brass Compression Nut.

Faucets require mounting hole size of 7/16" - 1.5"

Contact Us \| Press Center \| Site Map \| Homepage
2012 G.A. Murdock Inc. All rights reserved.	Copyright & Trademark	Privacy Statement