Click for Mobile Version


Contact Us 800-568-7565
Search
 
Product Literature Order Express Credit Application FAQ About Us Contact Us

Pumps: Pumps

Booster, delivery and permeate pumps to increase the water pressure to water filtraiton systems and appliances.

Aquatec Delivery Pumps

Aquatec Delivery Pumps
These pumps are designed for intermittent duty, either to pressurize water from an atmospheric tank, to deliver purified water to a specific point of use, or simply to increase pressure when required. These pumps can be controlled by either a pressure switch ("demand" mode) or an external power control device ("delivery" mode).
Item #DescriptionQC   
AQ-5851-7E12-J574Delivery - 70/60psi, 0.7gpm, 120V plug3/8" 
AQ-5852-7E12-J584Delivery - 70/60psi, 1.2gpm, 112V plug3/8" 
AQ-5853-1E12-J574Delivery - 130/60psi, 0.9gpm, 120V plug3/8" 
AQ-5853-GE12-V81DDelivery - Variable, 60psi, 0.1-1gpm 115V3/8" 


Aquatec Booster Pumps

Aquatec Booster Pumps
Provides reliable inlet pressure for efficient membrane utilization. These pumps are capable of continuous duty and are effective for recirculation based applications as well. They are ideally suited to work with hydro-pneumatic storage systems but are compatible with most hydraulic shut-off valves also.
Item #DescriptionQC   
1240632Inlet Variable Speed Booster Pump - 110V/60Hz, 65 psi 
AQ-6840-2J03-B221*Booster Pump - < 50 gpd1/4" 
AQ-8851-2J03-B423*Booster Pump - 50-100 gpd3/8" 
AQ-TAS114-19EP6800 Series Transformer - 120V 
AQ-TACS114-488800 Series Transformer - 120V 


Aquatec Permeate Pump

Aquatec Permeate Pump
Powered by the hydraulic energy of brine water usually lost to the drain, this Permeate Pump forces product water into the storage tank, reducing membrane back pressure and maximizing available feed pressure. These pumps dramatically improve the efficiency of R.O. water production, reducing wastewater by up to 80%.
Item #DescriptionQC   
AQ-ERP500-JGPermeate Pump - Bracket, < 50 gpd1/4" 
AQ-ERP1000-JGPermeate Pump - Bracket, > 50 gpd1/4" 


Aquatec Pressure Switches

Aquatec Pressure Switches
These switches, typically mounted near a hydropneumatic holding tank, automatically control the system pump and/or solenoid valve as required. The switches are normally closed and can be pre-set at various shut-off pressures. Pump is re-activated at 15 psi below the set point.
Item #DescriptionQC   
AQ-PSW240-00Tank Pressure Switch - 40 psi1/4" 
AQ-PSW260-00Tank Pressure Switch - 60 psi1/4" 
AQ-PSW280-00Tank Pressure Switch - 80 psi1/4" 
AQ-PSW340-00Tank Pressure Switch - 40 psi3/8" 
AQ-PSW360-00Tank Pressure Switch - 60 psi3/8" 
AQ-PSW380-00Tank Pressure Switch - 80 psi3/8" 
AQ-ESODC-460Electronic Shut-off Valve - 24V AC/DC1/4" 
AQ-21-127Electronic SOV Wire Harness - F-MM - 11" Long 


Contact Us | Press Center | Site Map | Copyright & Trademark | Privacy Statement | Homepage Visit the WQAAmerican Express
© 2019 G.A. Murdock Inc. All rights reserved.